Browsing by Author "Saygili, Yusuf"

Now showing 1 - 2 of 2

Citation - WoS: 1
Citation - Scopus: 4
Identification of Uncertainty Levels of Acoustic Properties of Biocomposites Under Different Mounting Conditions in Impedance Tube Tests
(Institute of Noise Control Engineering, 2021) Garip Genç; Şanlıtürk, Kenan Y.; Yusuf Saygılı; Hasan Körük; Koruk, Hasan; Saygili, Yusuf; Genc, Garip
Impedance tube method is widely used to measure acoustic properties of materials. Although this method yields reliable acoustic properties for soft textured materials, uncertainty levels of measured acoustic properties for hard materials, including biocomposites, can be quite large, mainly due to uncertain mounting conditions. Here, the effects of mounting conditions on the acoustic properties of biocomposites in an impedance tube are investigated. First, nominally identical biocomposite samples with a diameter equal to the inner diameter of impedance tube are manufactured and their acoustic properties are determined. As hard materials practically cause fitting problems in the impedance tube, the diameters of samples are reduced, as in practice, by small amounts and acoustic properties of modified samples are determined. Furthermore, in order to match the diameters of samples to the inner diameter of impedance tube, different materials such as tape, petroleum jelly and cotton are applied around samples to close the air gap between the samples and the tube's inner wall. All the results are compared, and the uncertainty levels caused by different mounting conditions on the acoustic properties of biocomposites are identified. The results show that the transmission loss (TL) measurements are dramatically affected by the mounting conditions while the sound absorption conditions are less sensitive to the mounting conditions. The deviations in the measured TL levels are highest for the samples with tape and wax (10–15 dB). On the other hand, the deviations in the measured sound absorption coefficients are highest for the samples with cotton and tape (1–2%).
Citation - WoS: 17
Citation - Scopus: 19
Investigation of the Acoustic and Mechanical Properties of Homogenous and Hybrid Jute and Luffa Bio Composites
(Taylor & Francis, 2020) Garip Genç; Hasan Körük; Kenan Y. Sanlıtürk; Yusuf Saygılı; Sanliturk, Kenan Y.; Saygili, Yusuf; Koruk, Hasan; Genc, Garip
Design and development of new biomaterials has become a necessity due to adverse effects of chemical materials on people and nature. As the mechanical properties of biomaterials are not as good as those of chemical materials, their different configurations should be developed and tested before considering them for practical applications. Acoustic and mechanical properties of homogenous and hybrid jute and luffa biocomposites are investigated here. Homogenous and hybrid composites using jute and luffa fibers and epoxy are designed and manufactured and methods for identification of the acoustic and mechanical properties are summarized. Acoustic and structural frequency response functions are measured using homogenous and hybrid composite plates to determine their natural frequencies and loss factors. Using the experimental modal parameters of the plates and their theoretical models, elasticity moduli of biomaterials are determined. The acoustic absorption properties and transmission losses of homogeneous and hybrid composites are determined using impedance tube method. Results show that homogenous and hybrid jute and luffa composites can have moderate absorption coefficients (0.1 for a thickness of 4 mm) and superior damping performance of luffa and stiffness property of jute can be used together to produce hybrid composites with high damping (2.2–2.6%) and elasticity modulus (3–5 GPa).