İnşaat Mühendisliği Bölümü Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.11779/1943
Browse
4 results
Search Results
Conference Object Citation - WoS: 10Citation - Scopus: 12Implications of Site Specific Response Analysis(Springer, 2018) Tönük, Gökçe; Tönük, Gökçe; Ansal, Atilla; 02.04. Department of Civil Engineering; 02. Faculty of Engineering; 01. MEF UniversityDefinition of design earthquake characteristics, more specifically uniform hazard acceleration response spectrum, on the ground surface is the primary component for performance based design of structures and assessment of seismic vulnerabilities in urban environments. The adopted approach for this purpose requires a probabilistic local seismic hazard assessment, definition of representative site profiles down to the engineering bedrock, and 1D or 2D quivalent or nonlinear, total or effective stress site response analyses depending on the complexity and importance of the structures to be built. Thus, a site-specific response analysis starts with the probabilistic estimation of regional seismicity and earthquake source characteristics, soil stratification, engineering properties of encountered soil layers in the soil profile. The local seismic hazard analysis would yield probabilistic uniform hazard acceleration response spectrum on the bedrock outcrop. Thus, site specific response analyses also need to produce a probabilistic uniform hazard acceleration response spectrum on the ground surface. A general review will be presented based on the previous studies conducted by the author and his co-workers in comparison to major observations and methodologies to demonstrate the implications of site-specific response analysis.Conference Object Citation - WoS: 1Citation - Scopus: 1A Simplified Approach for Site-Specific Design Spectrum(Springer, 2017) Tönük, Gökçe; Tönük, Gökçe; Ansal, Atilla; 02.04. Department of Civil Engineering; 02. Faculty of Engineering; 01. MEF UniversityThe design acceleration spectrum requires site investigations and site-response analyses in accordance with the local seismic hazard. The variability in earthquake source and path effects may be considered using a large number of acceleration records compatible with the earthquake hazard. An important step is the selection and scaling of input acceleration records. Likewise, a large number of soil profiles need to be considered to account for the variability of site conditions. One option is to use Monte Carlo simulations with respect to layer thickness and shear wave velocity profiles to account for the variability of the site factors. The local seismic hazard analysis yields a uniform hazard acceleration spectrum on the bedrock outcrop. Site-specific response analyses also need to produce a uniform hazard acceleration spectrum on the ground surface. A simplified approach is proposed to define acceleration design spectrum on the ground surface that may be considered a uniform hazard spectrum.Conference Object Observations From Geotechnical Arrays in Istanbul(Springer, 2015) Tönük, Gökçe; Tönük, Gökçe; Cetiner, Barbaros; Ansal, Atilla; Çtiner, Barbaros; 02.04. Department of Civil Engineering; 02. Faculty of Engineering; 01. MEF UniversityFew small earthquakes with local magnitude slightly larger than M-L = 4 were recorded by geotechnical downhole arrays that have been recently deployed in the west side of Istanbul. Same events were also recorded by Istanbul Rapid Response Network (IRRN) which comprises of 55 surface strong motion stations in the European side of Istanbul. The strongest one of these earthquakes took place on 12/3/2008 in Cinarcik with local magnitude of M-L = 4.8. Even though the observed PGAs were not exceeding 0.01 g, an effort is made to model the recorded response at the downhole array sites as well as the at the IRRN stations using the acceleration records obtained by the deepest sensors, i.e. on the engineering bedrock, at the downhole array sites as input bedrock motions. 1D equivalent linear site response analysis that is generally adopted for site-specific response analysis is used for modelling. Observations from the recorded response and results from 1D modelling of ground response have yielded in general good agreement between the observed and recorded soil response at the station sites.Article Citation - WoS: 6Citation - Scopus: 6Case Study on Seismic Behavior of Aseismically Designed Reinforced Concrete Frame Structures(Springer, 2017) Oyguc, Evrim; Tönük, Gökçe; Tönük, Gökçe; 02.04. Department of Civil Engineering; 02. Faculty of Engineering; 01. MEF UniversityIn this study, the seismic performances of two aseismically designed plan-irregular reinforced concrete frame (RCF) households damaged during the October 23, 2011 Van earthquake are assessed. Since no strong ground motion recordings from the main shock were available, first, strong ground motion parameters of the event are evaluated and then compatible with these parameters suits of real records are selected and scaled to match with the event's simulated acceleration spectrum to be used in the analytical investigations. The results of previous reconnaissance studies, in which one of the present authors was involved, are then discussed. Capacities of the considered RCF's are determined applying a 3D single-run adaptive pushover procedure that is capable of considering the effect of plan irregularities. The performance assessment procedure based on the current 2007 Turkish Earthquake Code is then applied to these investigated buildings. Additionally, nonlinear dynamic time history analyses are carried out using the previously selected time histories. The hysteretic behavior of the considered buildings is examined as the consequence of the conducted analyses and considering the different suits of selected ground motions, the seismic response of the buildings is evaluated in terms of interstorey drifts. None of the buildings are found to satisfy the expected performance level. Moreover, the numerical results are found to have good correlation with the field observation results.