Makine Mühendisliği Bölümü Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.11779/1944
Browse
4 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 4Identification of Uncertainty Levels of Acoustic Properties of Biocomposites Under Different Mounting Conditions in Impedance Tube Tests(Institute of Noise Control Engineering, 2021-09-01) Garip Genç; Şanlıtürk, Kenan Y.; Yusuf Saygılı; Hasan Körük; Koruk, Hasan; Saygili, Yusuf; Genc, GaripImpedance tube method is widely used to measure acoustic properties of materials. Although this method yields reliable acoustic properties for soft textured materials, uncertainty levels of measured acoustic properties for hard materials, including biocomposites, can be quite large, mainly due to uncertain mounting conditions. Here, the effects of mounting conditions on the acoustic properties of biocomposites in an impedance tube are investigated. First, nominally identical biocomposite samples with a diameter equal to the inner diameter of impedance tube are manufactured and their acoustic properties are determined. As hard materials practically cause fitting problems in the impedance tube, the diameters of samples are reduced, as in practice, by small amounts and acoustic properties of modified samples are determined. Furthermore, in order to match the diameters of samples to the inner diameter of impedance tube, different materials such as tape, petroleum jelly and cotton are applied around samples to close the air gap between the samples and the tube's inner wall. All the results are compared, and the uncertainty levels caused by different mounting conditions on the acoustic properties of biocomposites are identified. The results show that the transmission loss (TL) measurements are dramatically affected by the mounting conditions while the sound absorption conditions are less sensitive to the mounting conditions. The deviations in the measured TL levels are highest for the samples with tape and wax (10–15 dB). On the other hand, the deviations in the measured sound absorption coefficients are highest for the samples with cotton and tape (1–2%).Article Citation - WoS: 12Citation - Scopus: 15Modelling Small and Large Displacements of a Sphere on an Elastic Half-Space Exposed To a Dynamic Force(IOP Publishing, 2021-07-15) Hasan Körük; Koruk, H.Spheres at medium interfaces are encountered in many applications, including in atomic force microscopy or indentation tests. Although the Hertz theory describes the contact mechanics between an elastic sphere and an elastic half-space for static loading and small deformations very well, there is a need to consider the density of the medium, the mass of the sphere and the radiation damping for dynamic loading to obtain reliable results. In this study, an analytical model for predicting the small and large displacements of a sphere on an elastic half-space exposed to a dynamic force is developed. For this purpose, after summarizing a mathematical model that has recently been proposed for the sphere at a medium interface, a finite element model for the sphere at an elastic interface is developed. Based on the comparison of the mathematical and finite element models, an improved analytical model for the sphere at an elastic interface is developed. In addition to considering the elastic properties of the medium and the size of the sphere, the model developed here takes into account the density of the medium, the mass of the sphere, and the radiation damping, and the model is valid for small and large sphere displacements. The developed model can be used to understand the dynamic responses of spherical objects at medium interfaces in practical applications. Furthermore, the proposed model is a remarkable tool for undergraduate and graduate students and researchers in the fields of engineering, materials science and physics to gain insight into the dynamic responses of spheres at medium interfaces. © 2021 European Physical Society.Article Citation - WoS: 19Citation - Scopus: 20Investigation of the Acoustic and Mechanical Properties of Homogenous and Hybrid Jute and Luffa Bio Composites(Taylor & Francis, 2020-05-20) Garip Genç; Hasan Körük; Kenan Y. Sanlıtürk; Yusuf Saygılı; Sanliturk, Kenan Y.; Saygili, Yusuf; Koruk, Hasan; Genc, GaripDesign and development of new biomaterials has become a necessity due to adverse effects of chemical materials on people and nature. As the mechanical properties of biomaterials are not as good as those of chemical materials, their different configurations should be developed and tested before considering them for practical applications. Acoustic and mechanical properties of homogenous and hybrid jute and luffa biocomposites are investigated here. Homogenous and hybrid composites using jute and luffa fibers and epoxy are designed and manufactured and methods for identification of the acoustic and mechanical properties are summarized. Acoustic and structural frequency response functions are measured using homogenous and hybrid composite plates to determine their natural frequencies and loss factors. Using the experimental modal parameters of the plates and their theoretical models, elasticity moduli of biomaterials are determined. The acoustic absorption properties and transmission losses of homogeneous and hybrid composites are determined using impedance tube method. Results show that homogenous and hybrid jute and luffa composites can have moderate absorption coefficients (0.1 for a thickness of 4 mm) and superior damping performance of luffa and stiffness property of jute can be used together to produce hybrid composites with high damping (2.2–2.6%) and elasticity modulus (3–5 GPa).Article Citation - WoS: 56Citation - Scopus: 65An Assessment of the Performance of Impedance Tube Method(Institute of Noise Control Engineering, 2014-07-01) Hasan Körük; Koruk, HasanThe impedance tube method is widely used for measuring sound absorption (or reflection) coefficients of acoustic materials as a function of frequency. However, the sound absorption coefficients obtained using the impedance tube method may have some variations due to the dimensions (limits) of an impedance tube, sample preparation and sample mounting. This paper assesses the performance of the two-microphone impedance tube method as a function of frequency for different tube dimensions and materials and presents suggestions for increasing the reliability and repeatability of impedance tube measurements. First, after summarizing a systematic way for measuring acoustic transfer functions, sound absorption coefficients of a variety of materials ranging from conventional absorbing acoustic materials to samples with thin films are measured using two tubes with different tube diameter and microphone spacing. Uncertainty of sound absorption coefficients for various materials is discussed, and the frequency limits of impedance tubes are assessed. Then, a method for minimizing uncertainty due to sample mounting is proposed and the main findings are discussed.