Makine Mühendisliği Bölümü Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.11779/1944

Browse

Now showing 1 - 2 of 2

A Few Layers Graphene Encapsulated Fe-Based Nanoparticles Synthesized from Ferrocene Containing Precursors: CVD Optimization and Evaluation for Possible Nanocatalyst Performance towards H2 Production
(Pergamon-Elsevier Science Ltd, 2026) Demirbas, Derya; Kutluay, Sinan; Agaogullari, Duygu; Suzer-Cicek, Layda; Mertdinc-Ulkuseven, Siddika; Padberg, Gero; Felderhoff, Michael
This study focuses on optimizing the synthesis of a few-layer graphene-encapsulated iron-based nanoparticles (Fe/Fe3C@C), prepared through spray drying, chemical vapor deposition (CVD), and leaching processes using ferrocene-based precursors, and their application as nanocatalysts for hydrogen (H2) production via sodium borohydride (NaBH4) methanolysis. Ferrocene-impregnated silica powders were prepared by spray drying them from a solution containing ferrocene, fumed silica, and ethanol. Then, these prepared powders, known as precursor powders, were subsequently introduced into the CVD system. Both the reduction of ferrocene and the encapsulation of Fe-based nanoparticles by graphene layers occurred in-situ during the CVD process. CVD temperature and the flow rates of CH4 and H2 gases are critical parameters that effects of the microstructural, thermal, and magnetic properties of synthesized nanoparticles. The CVD system was performed at temperatures ranging from 850 to 1000 degrees C, with variable gas flow rates of 50 or 100 mL/min. Additionally, acid leaching with hydrofluoric (HF) and hydrochloric (HCl) acids ensured the synthesis of pure powders free from silica and uncoated Fe, confirming the chemical stability of the nanoparticles. The presence of graphene in all synthesized samples within these parameter ranges were confirmed by Raman spectroscopy. Phase identifications were carried out using X-ray diffraction (XRD) and Mo & uml;ssbauer spectroscopy, revealing the Fe and trace amount Fe3C as core phases. Transmission electron microscopy (TEM) revealed the core-shell structure of the nanoparticles with a few layers of graphene coatings. Based on the coercivity and magnetic saturation values obtained from vibrating sample magnetometry (VSM), synthesized core-shell nanoparticles exhibited soft magnetic properties (Ms = 22.4-33.5 emu/g, Hc = 82.3-278.3 Oe). Fe/Fe3C@C nanoparticles obtained under optimum conditions achieved very high H2 production rate (HPR = 54200 mLH2 gcat h- 1) values, with low activation energy (Ea = 20.08 kJ mol- 1) value, highlighting their potential as an efficient and promising candidate catalyst for industrial-scale H2 production via the NaBH4 methanolysis reaction. In addition, it was found that the Fe/Fe3C@C nanoparticles retained 48% and 71% of their initial activity after 5 consecutive cycles, as measured by the HPR and TOF values, respectively.
Nbmovta Refractory High-Entropy Alloy Incorporated Wni Matrix Composite as a Future Plasma-Facing Material: Evaluation of Mechanical Properties and Helium Ion Irradiation Behavior
(Elsevier Sci Ltd, 2025) Boztemur, Burcak; Filiz, Kaan; Karaguney, Zahide; Gokaydin, Eyupcan; Bozkurt, Yasin; Ozbasmaci, Ceren; Ovecoglu, M. Lutfi
Refractory high-entropy alloys (RHEAs) have gained attention in the last decades with their high mechanical strength, self-healing mechanism, and high irradiation resistance. These materials are evaluated to have a high potential as plasma-facing materials for fusion reactors. In this study, helium ion irradiation and mechanical behaviors of the RHEA-reinforced WNi matrix composites were investigated based on this perspective. Equimolar molybdenum, niobium, tantalum and vanadium powders were mechanically alloyed for 6 h to produce NbMoVTa RHEA with a single BCC phase. Then, different amounts (10, 20, 30, and 40 wt%) of RHEA were added into the W1Ni (containing 99 wt% W and 1 wt% Ni) matrix by planetary ball milling for 72 h. Consolidation was conducted by spark plasma sintering technique (1410 degrees C, 1 min). X-ray diffraction, scanning electron microscopy coupled with energy dispersion spectroscopy, and Archimedes' density analyses were performed on the composites. Moreover, wear and hardness properties of the composites were examined, and the lowest specific wear rate (0.59 mm3/N.m x 10- 5) and the highest hardness value (10.10 GPa) were found for the W1Ni-40RHEA composite. Helium irradiation was exposed to the composites to observe their irradiation resistance. It was observed that the lowest increment and the least deformation were obtained with the SPS'ed W1Ni-40RHEA composite. With the analysis of He+ irradiation, it was determined that the effect of radiation on mechanical properties is irrelevant. Also, it was observed that the addition of RHEA into the W matrix can create a high potential for using plasma-facing material. Moreover, it decreased the problems of tungsten against He+ irradiation.

Browse

Browsing Makine Mühendisliği Bölümü Koleksiyonu by Institution Author "Öveçoğlu, M. Lütfi"