Makine Mühendisliği Bölümü Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.11779/1944

Browse

Now showing 1 - 20 of 40

Citation - WoS: 1
Citation - Scopus: 2
1441. Quantification of the Flow Noise in Household Refrigerators
(JVE INTERNATIONAL LTD., 2014) Körük, Hasan; Arısoy, Ahmet; Bilgin, Necati
The flow noise in household refrigerators is quantified in this study. First, the sound pressure measurements in a quiet room using typical household refrigerators are conducted and the noise characteristics of the refrigerators are presented. Then, the flow noise in household refrigerators is quantified using the results of the overall analysis and Fourier transform of the measured sound pressure data. After that, the flow noise in household refrigerators is quantified using the sound pressure measurements conducted using a specially designed test rig. The frequency characteristics of the flow noise in household refrigerators are also explored and the contribution of the flow noise is identified.
Citation - Scopus: 6
18 - Acoustic and Mechanical Properties of Biofibers and Their Composites
(Elsevier, 2022) Koç, Büşra; Genç, Garip; Körük, Hasan
In this study, the acoustic and mechanical properties of many biofibers and their composites are presented. First, the sound absorption coefficients and transmission losses of commonly used natural fibers and their composites are presented, by clearly reporting the thickness of the samples, for three different frequency ranges (<500 Hz: low, 500–2000 Hz: medium, and >2000 Hz: high). In addition, the sound absorption coefficients (for low- and medium-frequency ranges) and noise reduction coefficients of some 40-cm-thick samples are overlaid in order to directly compare their performances. Second, the physical properties, such as the density, diameter, and length of biofibers, and mechanical properties, such as the damping (or loss factor) and Young’s modulus of biofibers and their composites, are presented in detail. For comparison purposes, the acoustic and mechanical properties of some conventional materials, such as carbon and glass fibers, are included in the tables and figures. Finally, the effects of some parameters, such as pretreatment, fiber diameter, fiber/matrix ratio, moisture content, manufacturing and machining parameters/techniques, and measurement conditions/methods, on the acoustic and mechanical properties of natural materials are presented. Furthermore, current applications and potential usage areas of natural fibers are briefly discussed.
Citation - Scopus: 3
19 - Identification of the Elastic and Damping Properties of Jute and Luffa Fiber-Reinforced Biocomposites
(Elsevier, 2022) Genç, Garip; Saygılı, Yusuf; Körük, Hasan; Şanlıtürk, Yusuf Kenan
Although there are many studies in the literature on the static mechanical properties of biomaterials such as tensile strength, the dynamic mechanical properties of biomaterials such as modal loss factors have not been investigated in detail. In this study, the Young’s moduli and damping (or loss factors) of some jute and luffa fiber-reinforced biocomposites are investigated. The effects of fiber/resin ratio and thickness on the mechanical properties of the jute and luffa composites are identified via an experimental approach. For this purpose, acoustic and structural frequency response functions of some homogeneous and hybrid jute and luffa composite plates with different fiber/resin ratios and thicknesses are measured. By analyzing the measured frequency response functions using the circle-fit method, the modal frequencies and loss factors of the homogeneous and hybrid composite plates are determined. By assuming that the homogeneous plates are isotropic, the same plates are modeled using the finite element method, and by comparing the experimental and theoretical natural frequencies, the elastic properties of the homogeneous plates are determined. In addition, the same homogeneous plates are modeled by considering an anisotropic material model, and the associated material properties are determined. By using the identified material properties, the finite element models of the hybrid composite plates are developed, and by comparing their experimental and theoretical natural frequencies, the identified elastic material properties are evaluated and validated.
Citation - WoS: 6
Citation - Scopus: 6
A New Approach for Measuring Viscoelastic Properties of Soft Materials Using the Dynamic Response of a Spherical Object Placed at the Sample Interface
(Springer, 2023) Besli, Ayça; Koç,Ömer Hayati; Körük,Hasan; Yurdaer, Berk Salih
Background: There are several techniques to characterize the mechanical properties of soft materials, such as the indentation method and the method based on the application of a spherical object placed inside the sample. The indentation systems usually yield the elastic properties of materials and their mathematical models do not consider the inertia of the sample involved in motion and radiation damping, while placing an object inside the sample is not practical and this procedure can alter the mechanical properties of the sample for the method based on the application of a bubble/sphere placed inside the sample. Objective: A new approach for the identification of the viscoelastic properties of soft materials using the dynamic response of a spherical object placed at the sample interface was proposed. Methods: The spherical object placed at the sample interface was pressed using an electromagnet and the dynamic response of the spherical object was tracked using a high-speed camera, while the dynamic response of the spherical object placed at the sample interface was estimated using a comprehensive analytical model. The effects of the shear modulus, viscosity, Poisson’s ratio and density of the soft sample, the radius and density of the spherical object and the damping due to radiation were considered in this mathematical model. The shear modulus and viscosity of the soft sample were determined by matching the experimentally identified and theoretically estimated responses of the spherical object. Results: The shear moduli and viscosities of the three phantoms with the gelatin mass ratios of 0.20, 0.25 and 0.29 were measured to be 3450, 4300 and 4950 Pa and 12.5, 14.0 and 15.0 Pa⋅s, respectively. The shear modulus and viscosity of the phantom increases as the gelatin mass ratio increases. The frequency of oscillations of the hemisphere placed at the phantom interface increases as the gelatin mass ratio increases due to stiffness increase. Conclusions: After matching the experimental and theoretical steady-state displacements and amplitudes of oscillations of the hemisphere at the sample interface, the comparison of the experimentally identified and theoretically predicted frequency of oscillations further confirmed the identified material properties of the samples. The approach presented here is expected to provide valuable information on material properties in biomedical and industrial applications.
Citation - WoS: 9
Citation - Scopus: 12
A New Triangular Composite Shell Element With Damping Capability
(Elsevier, 2014) Körük, Hasan; Şanlıtürk, Kenan Yüce
This paper presents a new triangular composite shell element with damping capability. Formulation of the composite triangular shell element is based on stacking individual homogeneous triangular shell ele- ments on top of each other. The homogeneous shell element is an assembly of a triangular membrane element with drilling degrees of freedoms and a plate element. Damping capability is provided by means of complex element stiffness matrix of individual flat layers of the composite element. These elements with damping capability allow modelling general structures with damping treatments. A few test cases are modelled using triangular finite element developed here and the results of the complex eigenvalue analyses are compared with those of the quadrilateral shell elements proposed recently. The results obtained using the presented triangular and previous quadrilateral composite elements are also com- pared with those based on modal strain energy method and experimental results. Comparisons of the experimental and the theoretical results confirm that the modal properties including modal damping lev- els of structures with damping treatments can be predicted with high accuracy using the proposed finite element.
Citation - WoS: 29
Citation - Scopus: 36
Acoustic and Mechanical Properties of Luffa Fiber-Reinforced Biocomposites
(Elsevier, 2019) Genç, Garip; Körük, Hasan
This chapter presents an overview of acoustic and mechanical behaviors of luffa fiber reinforced biocomposites. A growing number of studies are examining the composites of biodegradable fibers such as flax, hemp, kenaf and luffa due to the adverse effects of chemical materials on nature. The low cost and superior acoustic and acceptable mechanical properties of biocomposites make them very attractive for practical applications such as sound and vibration isolation. However, the acoustic and mechanical characteristics of biocomposites and their dynamic behaviors should be fully determined before considering them for practical applications. In this chapter, acoustic properties, such as sound absorption and transmission loss, and mechanical properties, such as damping and elasticity of luffa fiber reinforced composites, are presented. The variations in acoustic and mechanical properties due to different samples and manufacturing process are explored.
Citation - WoS: 25
Citation - Scopus: 26
Acoustic Particle Palpation for Measuring Tissue Elasticity
(American Institute of Physics, 2015) El Ghamrawy, Ahmed; Körük, Hasan; Choi, James J; Pouliopoulos, Antonios N
We propose acoustic particle palpation—the use of sound to press a population of acoustic particles against an interface—as a method for measuring the qualitative and quantitative mechanical properties of materials. We tested the feasibility of this method by emitting ultrasound pulses across a tunnel of an elastic material filled with microbubbles. Ultrasound stimulated the microbubble cloud to move in the direction of wave propagation, press against the distal surface, and cause deformations relevant for elasticity measurements. Shear waves propagated away from the palpation site with a velocity that was used to estimate the material’s Young’s modulus.
Citation - WoS: 13
Citation - Scopus: 17
Acoustic Streaming in a Soft Tissue Microenvironment
(Elsevier, 2019) El Ghamrawy, Ahmed; Mohammed, Ali; Jones, Julian R; Körük, Hasan; Choi, James J; de Comtes, Florentina
We demonstrated that sound can push fluid through a tissue-mimicking material. Although acousticstreaming in tissue has been proposed as a mechanism for biomedical ultrasound applications, such as neuromodu-lation and enhanced drug penetration, streaming in tissue or acoustic phantoms has not been directly observed. Wedeveloped a material that mimics the porous structure of tissue and used a dye and a video camera to track fluidmovement. When applied above an acoustic intensity threshold, a continuous focused ultrasound beam (spatialpeak time average intensity: 238 W/cm2, centre frequency: 5 MHz) was found to push the dye axially, that is, in thedirection of wave propagation and in the radial direction. Dye clearance increased with ultrasound intensity andwas modelled using an adapted version of Eckart’s acoustic streaming velocity equation. No microstructuralchanges were observed in the sonicated region when assessed using scanning electron microscopy. Our study indi-cates that acoustic streaming can occur in soft porous materials and provides a mechanistic basis for future use ofstreaming for therapeutic or diagnostic purposes.
Citation - WoS: 54
Citation - Scopus: 64
An Assessment of the Performance of Impedance Tube Method
(Institute of Noise Control Engineering, 2014) Hasan Körük
The impedance tube method is widely used for measuring sound absorption (or reflection) coefficients of acoustic materials as a function of frequency. However, the sound absorption coefficients obtained using the impedance tube method may have some variations due to the dimensions (limits) of an impedance tube, sample preparation and sample mounting. This paper assesses the performance of the two-microphone impedance tube method as a function of frequency for different tube dimensions and materials and presents suggestions for increasing the reliability and repeatability of impedance tube measurements. First, after summarizing a systematic way for measuring acoustic transfer functions, sound absorption coefficients of a variety of materials ranging from conventional absorbing acoustic materials to samples with thin films are measured using two tubes with different tube diameter and microphone spacing. Uncertainty of sound absorption coefficients for various materials is discussed, and the frequency limits of impedance tubes are assessed. Then, a method for minimizing uncertainty due to sample mounting is proposed and the main findings are discussed.
Citation - WoS: 4
Citation - Scopus: 4
Application of Ultrasonic Vibrations for Minimization of the Accumulation of Limescale in Steam Irons
(Elsevier, 2018) Körük, Hasan; Şanlıtürk, Kenan Yüce; Serenli, Muzaffer
The accumulation of limescale in steam irons can significantly reduce the ironing efficiency. It is this problem that inspired us to introduce ultrasonic vibrations to irons in order to minimize limescale accumulation. This study describes a methodology for designing, modelling and optimizing an iron fitted with an ultrasonic exciter in an attempt to minimize limescale accumulation. In our methodology, first, an experimental demonstration of the potential benefits of ultrasonic vibrations in steam irons was conducted, using two existing irons, one of which was equipped with an ultrasonic exciter. Having confirmed the benefits, an experimental iron was designed and then optimized to maximise ultrasonic vibrations using finite element analyses within a predefined frequency range. To validate the results of the finite element analyses, a prototype iron base was built, and forced vibrations of this prototype, at ultrasonic frequencies ranging from 35 to 40 kHz, were measured using a laser vibrometer. The results of the theoretical and experimental vibration analyses as well as the physical experiments on the steam irons indicate that it is possible for ultrasonic vibrations to be utilized in irons to minimize the accumulation of limescale.
Citation - WoS: 10
Citation - Scopus: 20
Assessment of the Measurement and Prediction Methods for the Acoustic Properties of Natural Fiber Samples and Evaluation of Their Properties
(Taylor & Francis, 2021) Körük, Hasan
Although some studies have been conducted to show how natural fibers canreplace synthetic materials, the use of many natural fibers is still limited. Onthe other hand, the use of natural fibers can become very common in manyapplications once their performance is fully understood. This paper aims topresent a critical assessment of the acoustic properties of natural fibersamples. First, the methods commonly used for the measurement and prediction of the acoustic properties of natural fiber samples are determined.Second, the common techniques for measuring sound absorption coefficients (SACs) and sound transmission losses (STLs) are presented, and theiradvantages and limitations are evaluated. After that, the models commonlyused for the prediction of acoustic properties are presented. Then, the SACsof many natural fiber samples are presented along with the thickness, bulkdensity and flow resistivity of the samples. Furthermore, the SACs of thesamples are normalized using sample thickness and bulk density, and thesound absorption performance of the fiber samples is evaluated. Based onthe results of many natural fiber samples, an empirical model for estimatingthe SACs of natural fiber samples is presented. Finally, the STLs of someporous natural fiber samples are presented.
Assessment of the Models for Predicting the Responses of Spherical Objects in Viscoelastic Mediums and at Viscoelastic Interfaces
(IOP Publishing Ltd, 2021) Körük, Hasan
Spherical objects, such as bubbles and spheres, embedded in mediums and atviscoelastic interfaces are encountered in many applications, including the determination ofmaterial properties. This paper assesses the models for predicting the responses of sphericalobjects in viscoelastic mediums and at viscoelastic interfaces used in various applications. Themodels are presented very compactly, and evaluations are performed based on the analyses ofthe models for the spherical objects in viscoelastic mediums and at viscoelastic interfaces. First,the models for predicting the static displacements of spherical objects are presented andassessed. After that, the models for predicting the dynamic responses of spherical objects arepresented and their dynamic behaviours are compared. Then, the models for the deformation ofthe medium around spherical objects and stress distribution are presented and evaluated. Themodels and evaluations presented in this study can be exploited in various applications,including biomedical applications.
Citation - WoS: 3
Citation - Scopus: 3
Characterization of Viscoelastic Materials Using Free-Layered and Sandwiched Samples: Assessment and Recommendations
(Polish Physical Society, 2015) Özer, Mehmet Sait; Körük, Hasan; Şanlıtürk, Kenan Yüce
Viscoelastic materials are widely used in many applications in practice. However, determination of the elastic and damping properties of these materials is quite difficult in the sense that the identified results may contain high degree of uncertainty. The characterization of viscoelastic materials using the Oberst beam method, based on non-contact excitation and response measurements, is revisited in this paper. The effects of signal processing parameters such as frequency resolution in Frequency Response Function (FRF) measurements, as well as the effects of various single-degree-of-freedom modal analysis methods, including circle-fit, half-power and line-fit are investigated first. Then, the modal loss factors, Young's modulus and shear modulus of some sample viscoelastic materials are identified using both the free-layered and sandwiched samples. The results obtained from different tests are compared, discussed and some recommendations are made so as to identify the damping and elastic properties of typical viscoelastic materials with better accuracy. Analyses of a large number of FRF measurements show that the selection of the appropriate signal processing parameters and the use of appropriate modal analysis method can be very significant during the identification of viscoelastic materials. By following the approach presented in this paper, the damping and elastic properties of viscoelastic materials can be identified with better accuracy using either free-layered or sandwiched samples. The material properties obtained by this approach can be used for developing valid structural models and/or for damping optimization purposes.
Citation - WoS: 6
Citation - Scopus: 10
Detection of Air Leakage Into Vacuum Packages Using Acoustic Measurements and Estimation of Defect Size
(Elsevier, 2019) Körük, Hasan; Şanlıtürk, Kenan Yüce
Air leakages in food and ingredient packages which are sealed in vacuum environments may cause a marked deterioration of the product, leading to a loss of functionality. Manufacturers of such products have very stringent but rather costly quality control procedures and there is a pressing need for developing more economical ways of automated quality control techniques to test the vacuum packages reliably. However, due to the fact that the defect size of a typical package with a leakage problem could be micro- or nano-scale, such faults are not detectable using conventional techniques. In this paper, the performance of a proposed acoustic method is assessed for the detection of air leakage in instant dry yeast packages sealed in a vacuum environment, which are typical of food and ingredients packaged under vacuum conditions. The investigation is carried out in both laboratory and in-situ environments. The acoustic pressure created by leaking air into the faulty packages is measured using a low-noise microphone in an acoustic chamber. Faulty packages are then identified using the changes in measured sound pressure levels within a certain frequency band. A mathematical model is also proposed to predict the pressure inside a yeast package with certain defect size as a function of time. The mathematical model is then used to determine the size of a defect causing the leakage, using the time required for the pressure inside a faulty yeast package to reach to a threshold level. The results of this investigation show that, using the state of the art measurement techniques, it is possible to detect packages with leakage problem if the diameter of the defect is greater than a few tens of micrometres.
Development of a Model for Predicting Dynamic Response of a Sphere at Viscoelastic Interface: a Dynamic Hertz Model
(IOP Publishing Ltd, 2021) Körük, Hasan
A model for predicting the dynamic response of a sphere at viscoelastic interface is presented. The model is based on Hertz contact model and the model for a sphere in a medium.In addition to the elastic properties of medium and the size of sphere, the model considers thedensity of sphere, the density and viscosity of medium, and damping of oscillations of spheredue to radiation of shear waves. The model can predict not only the effects of the mechanicalproperties of medium, the physical properties of sphere, and the amplitude of excitation forceon sphere displacement, but also the effects of these parameters on shift of resonancefrequency. The proposed model can be used to identify the elastic and damping properties ofmaterials, and to understand the dynamic responses of spherical objects at viscoelasticinterfaces in practical applications.
Citation - WoS: 9
Citation - Scopus: 11
Development of an Equivalent Shell Finite Element for Modelling Damped Multi-Layered Composite Structures
(Elsevier, 2020) Şanlıtürk, Kenan Y.; Özer, Mehmet Sait; Körük, Hasan
A new equivalent shell finite element (FE) for modelling damped multi-layered structures is presented in this study. The method used for developing the new FE for such structures is based on the idea that the strain energy of the equivalent single-layer FE must be equal to the sum of the strain energies of individual layers. The so-called energy coefficients are defined for this purpose for the extensional, bending and shear deformations of the composite structure. These coefficients are then determined and used as correction multipliers during stacking the elemental matrices of individual layers. Two approaches, based on second-order strain or stress distribution assumption through the composite thickness, are investigated for deriving the shear energy coefficients. The damping capability of the FE developed here originates from using complex Young's modulus to define the material properties of individual layers. The resulting equivalent single-layer shell element with four nodes has six degrees-of-freedom per node. The accuracy, advantages and limitations of the composite FE developed in this work are investigated using experimental as well as theoretical results. In the light of the finding of these investigations, further enhancement in the formulation is made by also utilising a new shear correction factor for the individual layers in the equivalent shell element. Final results for free- and constrained-layered structures confirm that the equivalent shell FE developed here can be used effectively for the prediction of the modal properties of damped multi-layered structures.
Citation - WoS: 6
Citation - Scopus: 8
Development of an Improved Mathematical Model for the Dynamic Response of a Sphere Located at a Viscoelastic Medium Interface
(IOP, 2021) Körük, Hasan
A comprehensive investigation on the static and dynamic responses of a sphere located at elastic and viscoelastic medium interfaces is performed in this study. First, the mathematical models commonly used for predicting the static displacement of a sphere located at an elastic medium interface are presented and their performances are compared. After that, based on the finite element analyses, an accurate mathematical model to predict the static displacement of a sphere located at an elastic medium interface valid for different Poisson's ratios of the medium and small and large sphere displacements is proposed. Then, an improved mathematical model for the dynamic response of a sphere located at a viscoelastic medium interface is developed. In addition to the Young's modulus of the medium and the radius of the sphere, the model takes into account the density, Poisson's ratio and viscosity of the medium, the mass of the sphere and the radiation damping. The effects of the radiation damping, the Young's modulus, density and viscosity of the medium and the density of the sphere on the dynamic response of the sphere located at a viscoelastic medium interface are explored. The developed model can be used to understand the dynamic responses of spherical objects located at viscoelastic medium interfaces in practical applications. Furthermore, the proposed model is a significant tool for graduate students and researchers in the fields of engineering, materials science and physics to gain insight into the dynamic responses of spheres located at viscoelastic medium interfaces.
Citation - WoS: 11
Citation - Scopus: 13
Displacement of a Bubble by Acoustic Radiation Force Into a Fluid-Tissue Interface
(2018) Körük, Hasan; Choi, James J
Microbubbles in an ultrasound beam experience a primary Bjerknes force, which pushes the microbubbles against a fluid-tissue interface and deforms the tissue. This interaction has been used to measure tissue elasticity and is a common interaction in many therapeutic and diagnostic applications, but the mechanisms of deformation, and how the deformation dynamic depends on the bubble and ultrasound parameters, remain unknown. In this study, a mathematical model is proposed for the displacement of a bubble onto a fluid-tissue interface and the tissue deformation in response to the primary Bjerknes force. First, a model was derived for static loading and the model's prediction of bubble-mediated tissue displacement and stresses in tissue were explored. Second, the model was updated for dynamic loading. The results showed that the bubble is both displaced by the applied force and changes its shape. The bubble displacement changes nonlinearly with the applied force. The stress values in tissue are quite high for a distance within one radius of the bubble from the bubble surface. The model proposed here is permissible in human tissue and can be used for biomedical ultrasound applications, including material characterization. (C) 2018 Acoustical Society of America.
Citation - WoS: 8
Citation - Scopus: 9
Displacement of a Bubble Located at a Fluid-Viscoelastic Medium Interface
(Acoustical Society of America, 2019) Körük, Hasan; Choi, James J.
A model for estimating the displacement of a bubble located at a fluid-viscoelastic medium interface in response to acoustic radiation force is presented by extending the model for a spherical object embed- ded in a bulk material. The effects of the stiffness and viscosity of the viscoelastic medium and the amplitude and duration of the excitation force on bubble displacement were investigated using the proposed model. The results show that bubble displacement has a nonlinear rela- tionship with excitation duration and viscosity. The time at which the steady state is reached increases with increasing medium viscosity and decreasing medium stiffness.
Citation - Scopus: 3
Effects of Machining on the Acoustic and Mechanical Properties of Jute and Luffa Biocomposites
(Elsevier, 2023) Genç, Garip; Körük, Hasan
After their production, biocomposite structures do not always have the final shape or dimensions required for their purpose, hence, they need machining. However, the effects of machining on the acoustic and mechanical properties of many biocomposites are still not well known. The effects of machining on the acoustic and mechanical properties of jute and luffa biocomposites are revealed in this chapter. To do this, the sound absorption coefficients (or SACs) and transmission losses (or TLs) of jute and epoxy and luffa and epoxy composite samples, with and without a turning process, are determined using the impedance tube method. The loss factors and Young’s moduli of the jute and epoxy and luffa and epoxy composite samples, with and without a milling process, are identified using experimental and theoretical modal analyses. The results show that, when the samples are machined, the sound absorption coefficients reduce by 3%-7%, the transmission loss levels increase by 6-11dB, and the damping levels and Young’s moduli reduce by 0.1%-0.5% and 3%-4%, respectively. © 2023 Elsevier Ltd. All rights reserved.

Browse

Browsing Makine Mühendisliği Bölümü Koleksiyonu by Institution Author "Körük, Hasan"